View FMA30071_4190973.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FMA3007
2-20GHZ BROADBAND MMIC AMPLIFIER
FEATURES:
* * * * * * 17 dBm Output Power 11 dB Gain pHEMT Technology Input Return Loss < -13dB Output Return Loss < -11dB Voltage Gain Control
Production Datasheet v3.0
FUNCTIONAL SCHEMATIC:
VG2 VDD
RF Input
RF Output
VG1
GENERAL DESCRIPTION:
The FMA3007 is a high performance 2-20GHz Gallium Arsenide monolithic travelling wave amplifier. It is suitable for use in broadband communication, instrumentation and electronic warfare applications. The die is fabricated using the Filtronic 0.25m process.
TYPICAL APPLICATIONS:
* * * Test Instrumentation Electronic Warfare Broadband Communication Infrastructure
ELECTRICAL SPECIFICATIONS:
PARAMETER
Small Signal Gain Small Signal Gain Input Return Loss Output Return Loss Reverse Isolation Output Power at 1dB compression point
CONDITIONS 1, 2, 3
2-12GHz 12-20GHz 2-20GHz 2-20GHz 2-20GHz 2GHz 10GHz 20GHz
MIN
9.5 9.5 16 18 14 60 -
TYP
10.5 11.5 19 19 16 4.5 100 3.5
MAX
11.5 12.5 -13 -11 -27 8.5 5.5 150 -
UNITS
dB dB dB dB dB dBm dBm dBm dB dB mA V
Noise Figure Noise Figure Drain Current Drain Voltage
2-4.5 GHz 4.5-20 GHz For Vdd = 3.5V , Vg1 = -0.38V , Vg2=+1V
Notes: 1. TAmbient = +25C 2. Device is biased at constant gate voltage, measured on wafer with Z0 = 50 3. Measurement Conditions VG1= -0.38V, VDD= 3.5V, VG2=+1V.
1
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
ABSOLUTE MAXIMUM RATINGS:
PARAMETER
Max Input Power Gate Voltage Drain Voltage Total Power Dissipation Gain Compression Thermal Resistivity Operating Temp Storage Temp
SYMBOL
Pin VG1 VDD
ABSOLUTE MAXIMUM
+20dBm
PAD REF
A
PAD NAME
RF in VDP
DESCRIPTION
PIN COORDINATES (m)
(140, 1153) (2097, 140)
RF in (+Ve) Temperature Monitoring Diode
-2V B +10V C VDN
(-Ve) Temperature Monitoring Diode
Ptot
tbd
(2321, 140)
Comp
tbd 38C/W -40C to +85C -55C to +150C
D E F G H
GND VG1 VG2 RF Out GND VDD
Ground Gate Control Gain Control RF Out Ground Drain Voltage
(2545, 140) (2769, 140) (2993, 140) (3004, 1141) (2800, 1650) (2550, 1650)
JC
Toper Tstor
Note: Exceeding any one of these absolute maximum ratings may cause permanent damage to the device.
I
Note: Co-ordinates are referenced from the bottom left hand corner of the die to the centre of bond pad opening
PAD LAYOUT:
I A H G
B
C
D
E
F
DIE SIZE (m)
3150 x 1780
DIE THICKNESS (m)
100
MIN. BOND PAD PITCH (m)
220
MIN. BOND PAD OPENING (m x m )
100 x 100
2
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
TYPICAL PERFORMANCE FOR ON WAFER MEASUREMENTS:
Note: Measurement Conditions VG1= -0.38V, VDD= 3.5V, VG2=+1V, TAMBIENT = 25C
P1dB
20
P 1 d B (d B m )
15 10 5 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz)
Gain vs VG2 Control Voltage
10
Freq = 10 GHz
8
Gain (dB)
6 4 2 0 -0.5 -0.4 -0.3 -0.2 -0.1 0 Vg2(V)Voltage 0.1 0.2 0.3 0.4
3
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
TYPICAL MEASURED PERFORMANCE FOR ON WAFER TEMPERATURE MEASUREMENTS:
Note: Measurement Conditions VG1= -0.38V, VDD= 3.5V, VG2= +1V, TAMBIENT = -40C to +85C
4
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
S-PARAMETERS FOR ON-WAFER MEASUREMENTS:
Note: Measurement Conditions VDD= 3.5V, Vg1=-0.38V and Vg2=1V
S11 S21 S12 S22 Frequency Mag Angle Mag Angle Mag Angle Mag Angle 2 0.17 7.23 3.47 -36.35 0.00 -63.41 0.02 -48.45 2.19 0.17 2.14 3.45 -42.93 0.00 -29.52 0.02 -37.80 2.38 0.16 -4.69 3.43 -48.73 0.00 72.59 0.01 -33.00 2.57 0.15 -10.51 3.42 -54.29 0.00 42.47 0.00 27.64 2.76 0.14 -15.56 3.42 -59.82 0.00 27.49 0.01 -38.27 2.95 0.13 -20.19 3.42 -65.28 0.00 13.11 0.01 -44.59 3.14 0.12 -24.56 3.42 -70.67 0.00 4.32 0.01 21.28 3.33 0.11 -28.52 3.42 -75.97 0.00 -3.76 0.01 15.31 3.52 0.11 -32.28 3.42 -81.24 0.00 -11.28 0.01 13.40 3.71 0.10 -36.00 3.41 -86.45 0.00 -17.93 0.01 13.67 3.9 0.09 -39.67 3.42 88.39 0.00 -24.95 0.01 -16.72 4.09 0.08 -43.21 3.42 83.29 0.00 -30.94 0.01 -6.18 4.28 0.08 -46.86 3.42 78.22 0.00 -40.08 0.01 -65.06 4.47 0.07 -50.51 3.42 73.16 0.00 -45.92 0.02 -53.62 4.66 0.06 -53.98 3.43 68.10 0.00 -50.32 0.02 -44.57 4.85 0.05 -57.63 3.43 63.07 0.00 -56.49 0.02 -39.29 5.04 0.05 -60.76 3.44 58.02 0.00 -63.05 0.03 -37.33 5.23 0.04 -63.54 3.44 52.99 0.00 -67.95 0.04 -37.85 5.42 0.03 -66.22 3.45 47.95 0.00 -74.11 0.04 -39.95 5.61 0.02 -68.53 3.46 42.91 0.00 -79.14 0.05 -42.71 5.8 0.02 -68.00 3.47 37.87 0.00 -83.92 0.06 -45.73 5.99 0.01 -64.51 3.48 32.78 0.01 18.48 0.07 -49.38 6.18 0.00 -42.62 3.48 27.71 0.01 84.14 0.08 -53.42 6.37 0.00 39.78 3.49 22.64 0.01 80.03 0.09 -57.88 6.56 0.01 17.49 3.50 17.55 0.01 73.81 0.10 -62.71 6.75 0.02 16.81 3.51 12.44 0.01 68.78 0.11 -67.57 6.94 0.02 15.13 3.51 7.30 0.01 64.80 0.12 -72.36 7.13 0.03 84.08 3.52 2.14 0.01 60.68 0.13 -77.27 7.32 0.04 82.14 3.52 -3.01 0.01 55.34 0.14 -82.39 7.51 0.04 79.53 3.52 -8.15 0.01 49.63 0.15 -51.70 7.7 0.05 76.81 3.53 -13.28 0.01 47.53 0.16 87.01 7.89 0.05 74.57 3.53 -18.47 0.01 41.87 0.17 81.73 8.08 0.06 72.42 3.52 -23.66 0.01 38.81 0.18 76.45 8.27 0.07 69.51 3.52 -28.79 0.01 35.08 0.19 71.34 8.46 0.07 66.45 3.51 -33.90 0.01 30.21 0.20 65.86 8.65 0.08 64.01 3.51 -39.00 0.01 27.00 0.21 60.25 8.84 0.08 60.83 3.51 -44.12 0.01 21.43 0.22 54.28 9.03 0.09 58.56 3.50 -49.28 0.01 17.73 0.22 48.57 9.22 0.09 55.69 3.49 -54.36 0.01 16.35 0.23 42.85 9.41 0.09 52.28 3.48 -59.39 0.01 11.43 0.23 36.83 9.6 0.10 48.64 3.47 -64.39 0.01 8.25 0.24 30.81 9.79 0.10 45.29 3.46 -69.39 0.01 4.95 0.24 24.23 9.98 0.10 41.97 3.45 -74.39 0.01 2.14 0.24 17.61 10.17 0.11 38.97 3.45 -79.32 0.01 -1.56 0.24 10.75 10.36 0.11 36.22 3.44 -84.20 0.01 -5.54 0.24 3.94 10.55 0.11 33.38 3.43 -17.05 0.01 -10.51 0.24 -3.27 10.74 0.11 30.10 3.43 86.12 0.01 -14.21 0.24 -10.81 10.93 0.11 26.91 3.43 81.37 0.01 -19.00 0.24 -18.81
5
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
S-PARAMETERS CONTINUED
S11 Frequency Mag 11.12 11.31 11.5 11.69 11.88 12.07 12.26 12.45 12.64 12.83 13.02 13.21 13.4 13.59 13.78 13.97 14.16 14.35 14.54 14.73 14.92 15.11 15.3 15.49 15.68 15.87 16.06 16.25 16.44 16.63 16.82 17.01 17.2 17.39 17.58 17.77 17.96 18.15 18.34 18.53 18.72 18.91 19.1 19.29 19.48 19.67 19.86 20 S21 S12 S22 Angle Mag Angle Mag Angle Mag Angle 22.84 3.43 76.53 0.01 -22.37 0.23 -27.22 19.06 3.43 71.78 0.01 -27.33 0.22 -36.26 14.69 3.44 67.04 0.01 -31.55 0.21 -45.16 9.79 3.45 62.28 0.01 -37.22 0.21 -55.08 6.23 3.47 57.43 0.01 -42.25 0.20 -65.94 1.32 3.49 52.51 0.01 -48.26 0.19 -77.17 -2.75 3.52 47.60 0.02 -52.88 0.18 -17.48 -7.08 3.54 42.70 0.02 -57.45 0.17 77.51 -11.05 3.58 37.72 0.02 -64.77 0.16 63.15 -15.83 3.62 32.50 0.02 -71.06 0.16 48.80 -20.74 3.65 27.22 0.02 -76.93 0.15 33.57 -26.37 3.68 21.86 0.02 -82.74 0.15 17.88 -33.12 3.72 16.46 0.02 -16.85 0.15 1.73 -39.86 3.75 11.01 0.02 85.12 0.15 -13.77 -46.40 3.78 5.41 0.02 79.01 0.15 -28.48 -54.81 3.80 -0.34 0.02 73.33 0.15 -41.98 -64.08 3.81 -6.03 0.02 68.29 0.16 -54.27 -72.76 3.82 -11.60 0.02 62.69 0.16 -65.54 -47.47 3.84 -17.22 0.02 57.29 0.16 -76.15 47.91 3.85 -22.91 0.02 51.71 0.17 -50.08 71.00 3.85 -28.64 0.02 46.06 0.17 48.74 53.20 3.84 -34.30 0.02 40.76 0.16 76.52 33.02 3.84 -39.83 0.02 34.90 0.16 69.26 13.93 3.85 -45.39 0.02 29.64 0.16 62.48 -4.28 3.85 -51.01 0.02 24.41 0.16 56.54 -18.94 3.85 -56.69 0.02 19.88 0.16 50.74 -30.60 3.85 -62.28 0.02 14.12 0.15 45.36 -41.49 3.85 -67.91 0.03 8.67 0.15 41.50 -51.22 3.86 -73.44 0.03 3.54 0.14 37.88 -59.08 3.87 -79.17 0.03 -3.05 0.14 35.17 -68.00 3.87 -84.87 0.03 -7.81 0.14 31.98 -76.62 3.87 -18.55 0.03 -13.42 0.14 28.68 -83.90 3.87 83.72 0.03 -18.83 0.13 25.14 17.35 3.87 77.99 0.03 -24.46 0.13 22.71 82.44 3.88 72.22 0.03 -29.63 0.13 20.43 76.96 3.89 66.41 0.03 -35.63 0.13 18.02 70.63 3.89 60.59 0.03 -40.03 0.13 15.16 62.97 3.89 54.74 0.03 -46.04 0.13 11.60 54.75 3.89 48.84 0.03 -51.04 0.13 7.77 45.09 3.90 42.97 0.03 -56.89 0.12 4.20 34.89 3.90 37.06 0.03 -61.73 0.12 1.11 25.38 3.90 31.13 0.03 -67.11 0.12 -3.30 14.08 3.91 25.16 0.03 -72.52 0.12 -7.78 -0.07 3.91 19.10 0.03 -78.57 0.12 -12.88 -17.44 3.92 13.14 0.03 -84.34 0.12 -19.22 -45.86 3.93 6.99 0.03 -17.99 0.11 -24.90 -13.12 3.95 0.89 0.03 84.17 0.10 -30.45 61.43 3.96 -5.39 0.03 78.45 0.10 -37.05
0.11 0.11 0.11 0.11 0.11 0.11 0.10 0.10 0.10 0.10 0.09 0.09 0.08 0.08 0.07 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.04 0.04 0.04 0.05 0.05 0.06 0.06 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.05 0.04 0.04 0.03 0.02 0.02 0.03
6
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
BIASING CIRCUIT SCHEMATIC:
VDD VG2 100nF 100pF 100pF 100nF
RF Output RF Input
VG1 100nF 100pF
ASSEMBLY DIAGRAM:
It is recommended that the RF connections be made using two bond wires 25m in diameter and a maximum length of 300m. Improved input return loss can be achieved, to compensate for bond wire length, with the addition of a microstrip transformer, shown in the diagram below.
To Evaluation Board via an 0402 Surface Mounted capacitor 100pF Capacitor
0.8mm 0.61mm
0.8mm 0.61mm
1.0mm
1.0mm
Substrate: Alumina Thickness: 635m Transformer Impedance 43 Electrical Length 32 at 10GHz
100pF Capacitors
To Evaluation Board via an 0402 Surface Mounted capacitor
BILL OF MATERIALS:
COMPONENT
All RF tracks should be 50 characteristic material Capacitor, 100pF, chip capacitor Capacitor, 100pF, 0402
7
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com
FMA3007
Production Datasheet v3.0
PREFERRED ASSEMBLY INSTRUCTIONS:
GaAs devices are fragile and should be handled with great care. Specially designed collets should be used where possible. The recommended die attach is gold/tin eutectic solder under a nitrogen atmosphere. Stage temperature should be 280-290C; maximum time at temperature is one minute. The recommended wire bond method is thermo-compression wedge bonding with 0.7 or 1.0 mil (0.018 or 0.025 mm) gold wire. Stage temperature should be 250-260C. Bonds should be made from the die first and then to the mounting substrate or package. The physical length of the bondwires should be minimised especially when making RF or ground connections.
ORDERING INFORMATION:
PART NUMBER
FMA3007 (Gel-pak available on request)
DESCRIPTION
Die in Waffle-pack
HANDLING PRECAUTIONS:
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be treated as Class 0 (0-250 V) as defined in JEDEC Standard No. 22-A114. Further information on ESD control measures can be found in MIL-STD-1686 and MILHDBK-263.
APPLICATION NOTES & DESIGN DATA:
Application Notes and design data including Sparameters, noise data are available on request.
DISCLAIMERS:
This product is not designed for use in any space based or life sustaining/supporting equipment.
8
Specifications subject to change without notice Filtronic Compound Semiconductors Ltd Fax: +44 (0) 1325 306177 Email: sales@filcs.com
Tel: +44 (0) 1325 301111
Website: www.filtronic.com

▲Up To Search▲

Price & Availability of FMA30071

	To Download FMA30071 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .